Eaststar New Material (Tianjin) Limited
Eaststar New Material (Tianjin) Limited
Add to Cart
Rubber Cushion Pads for Solar Photovoltaic Panel Lamination ESCP-PV-G1
1.Introduction of Rubber Cushion Pads for Solar Photovoltaic Panel Lamination ESCP-PV-G1
Rubber Cushion Pads for Solar Photovoltaic Panel Lamination ESCP-PV-G1 is playing an important role used in the solar PV Photovoltaic panel laminator for the purpose of the production of solar photovoltaic panels or modules. The silicon rubber pad usage purpose is to protect the PV modules in the whole lamination process.
| Type | ES1200
| ES2200 | ES3200 | ES4200 |
| Hardness (Shaw A) | 70±2 | 70±2 | 65±2
| 75±2/60±2 |
| Pulling strength Mpa≧ | 11.5 | 14.2 | 16.8 | 48 |
| Tear strength N/mm≧ | 45 | 47 | 39 | 45 |
| Temperature resistance℃ | 220 | 240 | 180 | 180 |
| EVA resistant(comparative) | Middle level | Middle level | Higher level | Higher level |
| Normal service life (times)
| ＞2000 | ＞3000 | ＞4000 | ＞6000 |
| Appearance and color
| Black, glossy/matte or both sides glossy | Black, grey, both sides glossy | Black, glossy/matte or both sides glossy | Black, glossy/matte or both sides glossy |
|
Remarks | The maximum width of the door can reach 3200mm without seams Special specifications can be customized according to user requirements. | |||
2. Product features of Rubber Cushion Pads for Solar Photovoltaic Panel Lamination ESCP-PV-G1
As we know, the lamination process is the key link to ensure the high quality of PV panels. It lays the components of the components into the laminator, through the vacuum will be the air between the components, and then heated to make the EVA melting and pressurized, so that the molten EVA flow full of glass and the cell and the back plate gap between the cell and the back plate, and at the same time, through the extrusion to further drain the intermediate bubbles, will be the battery sheet, the glass and the back plate tightly bonded together, and cool down the temperature to solidify.
3. Product structure of Rubber Cushion Pads for Solar Photovoltaic Panel Lamination ESCP-PV-G1
We are well known as the right producer and supplier for the high quality silicon rubber cushion or buffering pads or plates used in the solar PV module lamination process.
4. Application of Rubber Cushion Pads for Solar Photovoltaic Panel Lamination ESCP-PV-G1
